Depth. (front to back) (All Models)
 
- Dimension ‘J’ is overall
extremities including the handrail, at 756mm. Allow
extra if AGA is sited away from the rear wall with
a gap.
- Dimension ‘K’ includes
the clearance necessary for the doors to open, 1125mm.
- Dimension ‘M’ refers
to the depth up to the overhang of the top plate, 698mm.
- Dimension ‘D’ at 679mm,
is the depth of the stove base plate and to which
any plinth or hearth should be constructed, but allow
extra if the stove is spaced away from the rear wall
|
Height. (All Models)
 
- ‘C’ is the height to the working surface.
- 851mm
- ‘F’ is the distance reached by the lids
when fully open, - 1330mm, but allow extra clearance
for comfortable handling.
- ‘B’ Some models ( Electric & Gas
PF) have a raised, cast-iron shroud along the top rear
edge at a height of 967mm, others merely have a raised
lip at 889mm.
 
Solid Fuel, Oil and Gas ( OF) fired
models have a top flue connection, ‘F’ at a
height of 959mm for Oil & Solid Fuel or 1035mm for
Gas stoves. |
Width
IMPORTANT. It is a natural feature of cast iron components
that the finished dimensions will vary. Consequently, if
the AGA is to be situated into a tight recess, then at
least 10mm should be added to these dimensions to ensure
sufficient clearance
AGA stoves are assembled from modules of standard widths,
according to the module chosen, but regardless of fuel
type.
2
and 3 Oven Models. Dimension ‘A’ is the overall
width at 987mm. Note that the flue pipe connection is not central,
but is off-set towards the right hand side at dimension ‘E’ 467mm.
This applies to all open flue models.
 4
Oven Model. Dimension ‘B’ is the overall width
at 1487mm
An Electric or Gas AGA module option may be fitted to the
left hand side of the ‘parent’ AGA stove and
the dimensions are then increased as shown left.
There
are also several other factors affecting the width of the
recess and the clearances required.
- If the right-hand wall protrudes forward beyond the
front of the AGA, then additional clearance is required
as shown in dimension ‘W’ 116mm.
- This is to allow the oven doors to hinge open beyond
90 degrees, so as to be able to remove the oven shelves
etc.
- On an oil-fired stove, where the control valve is
sited on the right-hand side panel there is no need to
consider the 116mm, as there is a separate requirement
for a clearance of 300mm. See below
- An oil-fired stove has an oil control valve fitted
externally to its left or right hand side panel, thus
extending the overall width, although it can be accommodated
within the adjacent work unit.
- Where the stove is fitted in a tight recess then an extra
clearance of ‘M’ 300mm should be added to the
normal width dimensions.
- If the right hand wall extends beyond the front of the AGA,
and the oil control is fitted to the right-hand side, then
the gap should be 300mm on the right, which will also take
into account the 116mm referred to above, for door opening
clearance
|
DIMENSIONS